![]() This can be very difficult because most wheel wells are normally a flat finish. The wax should remove any lasting signs of the road striping paint. Once you have cleaned the road striping paint off of your vehicle, you should apply a good coat of car wax to the vehicle’s finish. THIS WILL DAMAGE THE FINISH OF YOUR VEHICLE. WE RECOMMEND THAT YOU DO NOT SCRUB YOUR VEHICLE'S FINISH WITH A SOLVENT, ABRASIVE PAD, OR SCOURING CLEANSER. This should remove most of the road striping paint. Then you should take the vehicle for another pressure washing. Allow the jelly to remain on the paint for 8 to 12 hours. If the paint has dried for a couple or a few days, or if you have heavy amounts of paint, we recommend that you apply a generous amount of petroleum jelly (vaseline) to the dried road striping paint. You may need to repeat this process if there is a heavy concentration of paint. After that time, re-wash the car with a pressure wash. If the pressure car wash does not remove the road stripe paint from your vehicle, we recommend that once the car has dried from the pressure washing, that you spray the paint residue with WD-40 and allow the WD-40 to stay on the area for 1-2 hours, which should penetrate the paint. The high water pressure should remove most of the paint unless it has dried for more than a day. We highly recommend that you wash the vehicle at a pressure car wash. ![]() If your car has paint on it from road striping, it's best to address the issue as soon as possible. BEST PRACTICES FOR REMOVING ROAD PAINT FROM CARS ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |